Search results
If the casting unit weight is less than 1.0kg, such as 0.9kg, 0.8kg etc., its raw casting price and machining price will be much higher than the result by this calculator. If the casting weight is very small, its raw material prices will take small proportion to its price,
- 18KB
- 4
[Please input the unit weight of casting part, and select what weight it is.] [Normally, the unit weight on the drawings is the "Finished Part Weight".] [Please notice, if the unit weight is less than 1.0kg, you can not calculate its price by this calculator.
Estimation of Steel Casting Prices Per Pound, KG and Ton. In this article we try to introduce some information about the estimated costs of cast steel castings by weight. Actually both the costs of cast iron castings and cast steel castings have the similar factors which can decide how much we cost, such as complexity of casting structure ...
To calculate the weight of the casting with the allowance, use the following formula: Qc = Qrc x k [kg] where: Qc is the mass of the raw casting together with the gating and feeding system in kg, k is a coefficient characterizing the recovery, depending on the type of alloy from which the casting is to be made, e.g.
Casting can be used to cast parts unlimited in size. Part Weight: Each casting process has a range of casting weights that it can produce under normal conditions. Lighter components can be produced using a wide variety of casting processes and the decision as to which casting process to use is more likely to be dictated by other factors.
Optimize casting weight and thickness. With iron castings weighing from a few grams to several hundred tonnes, casting technology and processes vary greatly. Elkem has a range of alloys to provide the optimum treatment for cast iron whatever the weight and section thickness of your casting.
People also ask
What is the difference between a casting process and a part weight?
Why are cast steel castings more expensive than iron castings?
What is the iron casting price calculator?
Why is the cost of a casting so high?
How to produce castings to rigid specifications?
How severe should a structural casting be?
low severity levels are specified for pressure-containing castings with high pressure rating and wall sections of 1 in. (25 mm) or less. Likewise, low severity levels are specified for machinery or dynamically loaded casting subject to high fatigue and impact stresses, and with wall sections of less than 1/2 in. (13 mm).
