Search results
Jan 24, 2024 · Please see the steps below. Step 1 Attach the strap tensioner to both snaphooks and the turnbuckle only to one snaphook. Step 2 Use the strap tensioner to tighten the sail shade. Step 3 Hook the turnbuckle onto the other snaphook and turn the middle section, tightening the turnbuckle to the required length.
- Decide What Shape Will Work Well with Your Area, and How Much Cover You Want
- Measure The Area to Make Sure Your New Shade Sail Will Fit
- Place Your Order with Clara Shade Sails!
- Do You Need Posts to Fix Your Sail to?
- Add Your Fixtures and Attach Your Sail
We have a range of ready made shade sails available, but if you can't find the size, shape or colour you need, we also offer a DIY Made to Measure Shade Sail service, or our partner supplier can provide you with Bespoke Conservatory Roof Shade Sail Blinds, which includes a measuring and installation service.
The measurements given on our shade sails are the widest part, and include the D Rings in each corner. You then need to measure any fitments or hooks you will be using to secure the sail to, and make sure you have made allowances for angling and pulling the shade sail as tight as possible, so the material is completely taut. The recommended space f...
Click hereto visit our Shade Sail Collection Page If you do make a mistake with your measurement, you can always exchange the unused sail for the correct shape or size – just get in touch with us for further information.
You can use metal or wooden fence posts that can be purchased from any DIY store. A diameter of 125mm for round poles/posts, and 125mm x 125mm for a square pole/post would be a good minimum size. Based on the length of the sail, plus your fixtures/hook length, measure from your other fixed points, and dig a suitably deep hole for you pole or post. ...
Allowing for the higher and lower corners, decide where your fixtures need to be placed. Screw in hooks/eyelets – Screw in your hooks or eyelets and fasten the sail using the cord provided, making sure you pull the ropes as tight as possible. Fixtures - Fix the pad eyes to your posts or brickwork (we recommend screws that are a minimum of 2.5cm lon...
Shade sails can be fixed to the exterior of your property, or they can be fitted to a wooden post of at least 100mm in diameter set in the ground. Metal poles are also an option, but they must be at least 48mm in diameter and set in the ground or fitted into a sleeve in the ground. Remember, one corner of the shade sail must point downwards to ...
Jul 12, 2023 · Mark the positions of your posts on the ground and dig a 3-foot hole using a post hole digger or auger for each. Place a post into each hole and fill the void using quick-setting concrete. Check plumb using a post level. Attach two support legs to each post using scrap boards to hold it plumb while the concrete sets.
MOUNTING THE POLE WITH GROUND BASE. The installation of the base on the concrete plinth or on reinforced concrete consists of 8 steps. The following is a step-by-step guide. 1 • Locate position. Locate the attachment points, orienting the pole toward the center of the sail. 2 • Drilling the well.
There are 5 steps in creating a custom made shade sail structure: Planning your structure. Installing your fixing points (posts/brackets etc.) Measuring your area. Ordering your shade sail using our online ordering system. Installing your shade sail. Follow these steps carefully and you will have a wonderful shade environment.
People also ask
How do I install a shade sail?
How do I tighten a sail shade?
Where do you fix a shade sail?
How do I attach a sail shade to my anchor point?
What size sleeve do you need for a shade sail?
How to remove a shade sail?
Lay your shade sail out and commence the installation. Tensioning. Using the selected fixing accessories, commence connecting the corners of the shade sail to the fixing points. Connect all points, using a ratchet tensioning tool if necessary to gain increased leverage. Stop tensioning when the shade sail is rigid with little or no creases.
