Search results
SMPTE 292 is a digital video transmission line standard published by the Society of Motion Picture and Television Engineers (SMPTE). This technical standard is usually referred to as HD-SDI; it is part of a family of standards that define a serial digital interface based on a coaxial cable, intended to be used for transport of uncompressed digital video and audio in a television studio ...
ats mapped into the 1.5 Gb/s payload. This standard defines the method of serializing the parallel sour. e format data to a serial bit stream. This interface may also carry packetized data mapped into the 1.5 Gb/s transport payload providing the constraints imposed by the refere.
Oct 10, 2022 · The cabling used for the SMPTE 292 electrical interface is coaxial cable with a nominal impedance of 75 Ω. Data is encoded in NRZ format, and a linear feedback shift register is used to scramble the data to reduce the likelihood that long strings of zeroes or ones will be present on the interface. The interface is self-clocking.
The cabling used for the SMPTE 292M electrical interface is coaxial cable with a nominal impedance of 75 Ω. Data is encoded in NRZ format, and a linear feedback shift register is used to scramble the data to reduce the likelihood that long strings of zeroes or ones will be present on the interface. The interface is self-clocking. Framing is ...
1 Scope. This standard defines a means of transporting stereoscopic images (Left eye and Right eye images) using an interface consisting of two streams based on the SMPTE ST 292-1 data structure. The Left eye images are carried on one stream of the interface and the Right eye images are carried on the other stream.
Feb 7, 2008 · This standard is a transport defining a bit-serial data structure for 1.5 Gb/s [nominal] component signals, SDTV signals mapped into the SMPTE 292 payload, and formatted packetized data. This standard specifies a coaxial cable interface suitable for application where the signal loss does not exceed an amount specified by the receiver ...
People also ask
What type of cabling is used for the SMPTE 292 electrical interface?
What is SMPTE 292 standard?
What is SMPTE ST 291.1?
Does SMPTE 292 support ancillary data?
This standard defines a bit-serial data structure and the coaxial cable interface specifications for 1.5 Gb/s [nominal] Signal/Data Serial Interface to carry either 1280×720, 1920×1080 or 2048×1080 active pixel formats mapped into the 1.5 Gb/s payload. This standard defines the method of serializing the parallel source format data to a ...
