Search results
TEST 1 | RESET THE CONTROLLER. If your PowerSteps are not working/functioning after you’ve completed the install the first test to solving the issue is to try resetting the controller before proceeding to other possible issues. Locate the AMP Research Controller under the hood (see Fig. 1).
Troubleshooting tips For additional troubleshooting information on K.2 Series powered loudspeakers, please see the “K.2 Series Service Trouble- shooting Guide” document available on the QSC Service Partner Portal.
May 9, 2023 · Verify the following: The unit is turned on (Power LED and LCD display both come on). The presence of an input signal (Signal LED indicator flashes). Use another loudspeaker to verify the signal, if necessary. If unit does not turn on, refer to K.2 Loudspeaker Does Not Turn On document.
The following chart provides a quick-guide to selecting the right K Family loudspeaker for the right application, based on the DMT™ concept: DMT™ – Application:
Make sure the power switch is off before attempting to make any input or output connections. By using good quality input and speaker cables, the like-lihood of erratic signal behavior is reduced to a minimum. Whether you make them or buy them, look for good quality wires, connectors and soldering techniques.
- 4MB
- 40
Curtis Controller Fault Code Translator. Video Tutorial: Reading Controller Fault Codes. Select Motor Controller Model.
People also ask
Can a K Series amplifier be remotely controlled?
Do all K Series amplifiers have power factor correction?
What are the most common transducer problems in K2 Series loudspeakers?
How does a K2 PWM controller work?
Does the K Series amplifier have a ground switch?
How does a K Series amplifier work?
If the motor is getting a 12 volt positive and a negative (ground) signal and does not respond, in most instances the motor will need to be replaced. The motor contains a gear drive system and employs rubber cushions that dampen start up and shut down. Currently there are three types of motors in service.
