Search results
Oct 15, 2015 · Heater valve replacement So managed it. Took about 2 hours and a few skinned knuckles and fingers. All seems OK so far. Only tip I would say is don't be afraid to pull the bloody think out once you disconnect the 2 hoses that enter the firewall. It will then give you enough room to disconnect the other 2 hoses and electrical connection.
May 31, 2005 · Originally posted by johnw: [qb]Craig, If you undo the 4 screws that hold the heater matrix in, you can drop down the matrix & valve to make access to the screws much easier.
- Overview
- Hard Reset
- Soft Reset
- Factory Reset
If your BlackBerry isn't working, perform a hard, soft, or factory reset using these simple steps
Smartphones are great, at least when they work. When they don’t, they’re nothing more than expensive paperweights. If your BlackBerry is frozen or unresponsive, a quick reset may be just the ticket to get it up and running again. Follow this guide to restore your BlackBerry to its former glory.
To perform a hard reset, remove the battery for a few seconds and then reinsert.
For a soft reset, press and hold the Alt, Right-Shift, and Backspace/Delete keys.
Open the battery cover on the back of the BlackBerry.
Remove the battery from the phone.
You can perform a hard reset on the BlackBerry Z10 by pressing and holding the Power button on the top of the phone for about 10 seconds.
Reinsert the battery after a few seconds.
To be on the safe side, wait for up to 30 seconds and then reinsert the battery into the back of the phone.
The BlackBerry should reboot and function normally. You may have to power the BlackBerry back on with the Power button.
Press and hold the Alt key.
This method will reset your BlackBerry without having to remove the battery. You cannot perform this method if your BlackBerry does not have a keyboard.
Press and hold the Right Shift key.
Continue to hold the Alt key while you hold the Shift key.
Press and hold the Backspace/Delete key.
Make sure you are continuing to hold the Alt and Shift keys while you hold the Backspace/Delete key.
Open the Options on your home screen.
Performing a factory reset, or security wipe, will remove all of your personal information and reset the phone to the state it was in when it came out of the box.
In the Security Settings menu, select Security Wipe.
Choose what you want erased.
Check the boxes for each of the items that you want wiped from the phone. If you want to completely erase your information, ensure that all of the boxes are checked.
To perform the wipe, you will need to enter the code. Type “blackberry” into the box and then select Wipe.
Jul 2, 2023 · Replacing a water heater in a Mobile home with Dave , still under warranty tried to tell the lady , shark byte to CPVC , recycled or another use!
- 30 min
- 294
- THE WATER HEATER FACTORY
- (89)
- Disconnect the battery. Loosen the hold down nut and bolt from the negative battery cable end and remove the connector from the battery post. This will prevent any shorts from damaging the electrical components.
- Raise the vehicle. If you can not easily reach the lower radiator hose, jack the vehicle up and secure it on jack stands to gain better access.
- Place the drain pan under the vehicle. In order to catch the coolant that will be drained, you will need to put the drain pan underneath the lower radiator hose.
- Remove the lower radiator hose. Remove the lower radiator hose from the radiator by first loosening the clamp and then gently but firmly twisting the hose to ensure that it is not stuck on.
Aug 28, 2008 · I pinched off the two heater hoses using small vise-grips and wood pieces in the jaws to flatten the hoses w/o tearing into the rubber. That stopped any flow. (just enough to run down your arm) With the hoses out of the way you can reach the cable clip. The clip pops off from the bottom of the plastic control valve frame.
People also ask
How do I Reset my Blackberry?
How do I Reset my Blackberry without removing the battery?
How do I Reset my Blackberry Z10?
How do I Reboot my Blackberry?
Jun 1, 2019 · I just didn't want to type all that. That being said, Teflon tape does the job just fine. Triumph probably used it on the heater control valve because they had a big vat of it laying around for other uses (as listed above) and found it worked fine on this as well. Reply.
