Search results
That means that someone very tall is likely to appreciate higher units and worktop than someone smaller. Having said that, there is a standard height that tends to work well for most people. Generally, base units tend to come to a height of 870mm off the ground. You’d then add 40mm of worktop to bring the total finished height to 910mm.
Jan 22, 2012 · hi, from the floor to the underneath of the work top should be 870mm ( most made to measure base end panels are 870mm in height).then from the top of the work top to the underneath of the wall units should be 18" . all cookers now come with adjustable legs so can be raised or lowered to suit the floor. regards lee
- you have to laugh- as there is no correct height for w/tops. have you thought of raising your cooker to 930mm. I build kitchens based on the heig...
- top of base unit should be 870mm from floor plus 40mm of worktop would normally give a finished height og 910mm. this would then allow the plinths...
- hello the height of base units are 720 +150 for plinth and 40mm for worktops =910 . one trick to make it look better just put a 15mm piece of match...
- In Response to your Question Cookers have a tolerance by means of adjustable feet to bring them up to your worktops.different heights in floor cove...
- Best thing to do is resolve it with the fitter if you are not happy then tell him or her that you are not satisfied and you would like this rectifi...
- The accepted standard is as everyone has said. 150 plinths, 720 base units and 40mm worktop leaving a finished height of 910mm. However every kitch...
- The correct hight for your 'units' will depend on the thickness of your worktop, however, the overall hight of units and the worktop should be 900m...
- Yes, you are right. The guideline measurement is 900 mm. Sounds like a measuring error to me. Dont listen if your builder says that the kickboards...
Feb 7, 2017 · The standard heights needed from the base unit fitting are as follows, to achieve the 490mm gap to the base of the wall units. The legs of the base unit are 150mm. The base unit sits on the legs and is 720mm in height. 40mm worktop. The total height of the base unit and worktop from the floor is (150 + 720 + 40 = 910mm).
Typically the height is made up of the following elements: Base cabinets: 720mm high. Base Cabinet Legs: 150mm high. Worktop Counter: 30mm thick (although this can vary, depending on the material) The base cabinet legs are adjustable, so they can compensate for any variation in worktop thickness. While the height is normally 900mm it is down to ...
Mar 30, 2024 · In the United States, most base units have a height of 34.5 inches (87.6 cm) from the floor to the top of the countertop surface. This measurement is based on ergonomic standards and is designed to provide a comfortable working height for most people. In Europe, however, standard kitchen base unit heights tend to be slightly taller at around 36 ...
The standard height of a kitchen worktop is around 900mm or 90cm, measured from the floor to the top surface of the worktop. Typically, it could comprise of the following elements: Plinth (kickboard) – 150mm. Base cabinet – 720mm. Worktop (thickness) – 40mm. The worktop height may vary a bit, mostly depending on the thickness of the ...
People also ask
How high should a base unit fit?
How high should a kitchen base unit be?
How tall is a base unit?
How tall should a kitchen unit be?
How tall is the base unit & worktop from the floor?
How high should a wall unit be?
Worktops should also sit square and level on top of any base unit, not overhang too far at the front or rear and again sit square to the front edge of any base unit it sits on. Successfully fitting kitchen base units and getting a good finish is not an easy job and to complicate matters even more, in 99% of cases the floor and walls you will be fitting them on or against will not be in any way ...
