Search results
instructables.com
- In this article, we’ll know how to make our own DIY weather station with the use of Arduino UNO and the DHT11 sensor in a step-by-step guide. We will also provide the circuit diagram and Arduino code in this article.
techatronic.com/diy-arduino-weather-station-dht11-sensor/DIY Weather Station With Arduino | DHT11 Sensor - Techatronic
People also ask
Can I build a weather station with Arduino?
How do I connect an Arduino weather station to an LCD display?
Can a weather station be a cloud based service?
How does Arduino work?
How do Arduino sensors work?
How do I install a rain gauge?
This tutorial will demonstrate how to assemble the weather station kit, how to set up basic serial communication to an Bluno M3 and how to output data readings through an LCD shield. From this starting point you can take the kit further and add your own ideas.
- 1. Shopping LinksBluno M3 - A Arduino STM32 ARM with Bluetooth 4.0LCD12864 Shield for ArduinoAssemblyInsert pole A in to pole B and place double-ar...
- 2. Take one single arm and hold up to pole assembly, perpendicular from double arm. Take securing plate and hold to the mating side. Secure togethe...
- 3. If you wish to use the RF communication module, you will need to attach the extra arm. Repeat steps as with the first single arm.Now it’s...
- 4. We can fit the anemometer module on the opposite end of the double arm. Just like before, fit the module over the moulded fitting, place an M3 n...
- 5. There are notches in the underside of the double arm for cable management.Next, the rain gauge. Place the rain gauge over the single arm fitting...
- 6. If you wish you may also add the RF transmitter module. This is fitted in the same way as the other modules, by fitting it over the arm’s...
- 7. Next we need to connect cables so that data can be transmitted. The anemometer has the shortest cable. Connect this to the jack in the underside...
- 8. The remaining long cables need to connect to the weather link control board. The cable from the wind vane connects to the “wind” jac...
- 9. Make the following connections from the Weather Link board to your microcontroller:
- 10. Copy and paste the wiki sample code in to the Arduino IDE and then upload it to your microcontroller. You can view the output on the IDE’...
Jul 30, 2016 · Use an Arduino to make your own backyard weather station and get accurate results for your location.
- Manas Manohar
Jan 19, 2024 · This article will delve into building your own Arduino weather station, encompassing aspects such as selecting the right components, the assembly process, programming the device, and how to make sense of the weather data gathered.
May 9, 2023 · Building a weather station with Arduino is an excellent beginner project that combines hardware and software skills. With the right components and some programming knowledge, you can build a weather station that measures temperature, humidity, barometric pressure, and wind speed and direction.
With this DIY Arduino weather station project, you can create your own customized environmental monitoring system. This beginner-friendly project combines the versatility of an Arduino board with affordable sensors to give you accurate, real-time climate data.
Nov 20, 2015 · Here in the 21st century, you can create your own backyard weather station that is computer-controlled, where all of the data is automatically captured and stored for later analysis. No more little black log book.
May 4, 2017 · This arduino weather station tutorial will demonstrate how to assemble the weather station kit, how to set up basic serial communication to an Bluno M3 and how to output data readings through an LCD shield.
