Search results
Page 5 GEN 3 ROUTER SETUP GUIDE (STANDARD GEN 2 KITS) Using the Extra RJ45 Ports Remove the RJ45 cover. Plug in your own ethernet cable to port 1 or 2. Connect the other end of your cable to your 3rd party hardware. Page 6 Power cycle the router by unplugging from power and then plugging back in. Factory reset the router by pushing the reset ...
Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Connect the "Type-B" terminal to the printer with the notched side facing UP. For details, refer to the instruction manual supplied with the USB cable.
Select a network indicated by the SSID of the Mobile WiFi. First press the button of your game machine to confirm the SSID and then press it again to input the Wi-Fi key. Page 17 WEP: The Wi-Fi key of the Mobile WiFi. The default SSID and key label are affixed to the Mobile WiFi.
AC1750 WiFi Mesh Extender 6. Unplug the extender and move it to a new location about halfway between your router and the area with a poor WiFi signal. 7. Use the Router Link LED to help you choose a spot where the extender-to-router connection is optimal. Page 15 DHCP server. d.
Page 59 Vzhled Kontrolka signálu Tlačítko napájení Kontrolka baterie Tlačítko reset Slot karty SIM Vypnutí Mobile WiFi: Stiskněte a podržte Tlačítko napájení, dokud nezhasnou všechny kontrolky. Obnova Mobile WiFi do továrního nastavení: Jehlou stiskněte a podržte Tlačítko reset při vypnutém zařízení Mobile WiFi.
Insert the micro-SIM Card 1. Take out the card sticker from the packing box. 2. Align the card sticker with the micro-SIM area on the metal-free side of the micro-SIM card and then stick it. 3. Open the micro-SIM card slot cover. NOTE: Do not remove the cover rudely, because it is connected with the device. Page 5 4.
Connect the powered-off modem to the router's WAN port with an Ethernet cable. Power on the modem, and then wait about 2 minutes for it to restart. Connect the power adapter to the router and turn it on. Verify that the hardware connection is correct by checking the following LEDs. Note: If the 2.4 GHz, 5 GHz, and 6 GHz LEDs are off, press and ...
