Search results
Remove battery cover. 3. Press the program button once. 4. Enter new user code. 5. Press lock button. 6. If programming is successful the keypad will flash green once, and you will hear one beep.
A factory reset will delete all codes associated with the lock. 1. Make sure the door is open and unlocked. 2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. 3. Press and release the program button. You will hear one short beep.
Perform a factory reset. A factory reset will delete all codes associated with the lock. 1. Make sure the door is open and unlocked. 2. Press and hold the program button for 30 seconds using the SmartKey tool or a paper clip. You will hear one long beep. 3. Press and release the program button.
Apr 30, 2024 · To perform a reset, first, take out the battery pack from the lock. Then, press and hold the Program button while you reinsert the battery pack into the lock. Be sure to keep holding the Program button for a full 30 seconds, until you hear the lock beep and see the status LED flash red.
Jun 11, 2021 · Follow these simple reset steps: Ensure the door with the Kwikset 888 SmartCode deadbolt with Z-Wave or 913/914 SmartCode is open and unlocked. Then go ahead and remove the battery pack. Press and hold the program button (this should be on the interior back panel of the lock) while re-inserting the battery pack.
Oct 22, 2019 · Kwikset SmartCode Locks ResetHome Automation https://www.systronicsrf.com/FeaturesDesigned for Everyone https://www.systronicsrf.com/system-features/designed...
- 1 min
- 199.9K
- Home Automation by SystronicsRF
1. Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the ...
