Search results
Note: The lock will time out after five seconds. Disabling and Deleting the Mastercode. 1. Keep door open. Press and HOLD the Program button until the keypad Flashes green (about 5 seconds). 2. Press Lock button once. 3. Enter Mastercode.
Enabling and Setting the MastercodeProgramming timeout: If no button is pressed for five seconds, the system will time out and you will need to restart the procedure.1. Keep door open. Press and HOLD the Program button until the keypad flashes green (about 5 seconds).2. Enter new Mastercode.3.
May 19, 2024 · Delete User Code: Press the program button the number of times that matches the old code position, enter a new code, and press the lock button. Delete User Code on touchscreen: Press the program, checkmark, and lock buttons. Enter the code twice, followed by the lock button both times. Method 1.
Remove battery cover. 3. Press the program button once. 4. Enter new user code. 5. Press lock button. 6. If programming is successful the keypad will flash green once, and you will hear one beep.
1. Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.
Deleting All User Codes with the Mastercode Enabled. 1. Keep door open. Press the Program button once. The keypad will flash green and you will hear three beeps. 2. Press Lock button once. 3. Enter Mastercode.
Insert current key. Insert the key that currently operates your lock. Rotate the key 90 degrees clockwise. Insert the SmartKey tool fully and firmly into the SmartKey hole. You may feel the tool click inside the lock. Remove the SmarKey tool. Remove the current key. Insert the new key you wish to use with the lock.
