Yahoo Web Search

Search results

  1. Oct 14, 2024 · A good selection would be three Genoas: A Genoa I for light winds (150%), a Genoa II for fresher breezes (135%) and a Genoa III for strong winds (105%). With the decrease in size (given as percent in overlap of the mast), the profile will become flatter and the cloth heavier.

    • what is the difference between a genoa and a mainsail bar detour1
    • what is the difference between a genoa and a mainsail bar detour2
    • what is the difference between a genoa and a mainsail bar detour3
    • what is the difference between a genoa and a mainsail bar detour4
    • what is the difference between a genoa and a mainsail bar detour5
  2. 5 days ago · The tables across most regions for adjustments of genoa size are similar. While these are linear tables, for the most part they seem to be good approximations of performance gain and loss. Subscribe. a brief description of how different regions adjust ratings.

  3. Oct 25, 2024 · Genoa. The genoa is a type of jib that is larger than the standard jib and overlaps the mainsail. This sail is particularly useful for upwind sailing as it provides more power and lift than a standard jib. The genoa is also useful for light wind conditions where a larger sail area is needed to catch the breeze. Storm Sail

  4. Oct 25, 2024 · The Genoa is attached to the mast and forestay and is used to capture as much wind as possible to propel the boat forward. The Genoa is typically used in conjunction with the mainsail and can be adjusted to optimize its performance.

  5. Oct 22, 2024 · On the other hand, the jib sits forward of the mast – it is important to note that when the jib overlaps the mast and mainsail because of its huge size, it is then called a genoa. The genoa may partially or completely cover the mainsail to increase the speed of the sailing yacht as desired.

  6. Oct 7, 2024 · I recently bought a new mainsail for my Contrast 33 sloop. The sail is Dacron with 4 full length batons. At the luff end of each baton is a baton box with a 10mm machine screw attached to a jaw and metal slug. As designed, this arrangement allows the slug to rotate vertically.

  7. Oct 7, 2024 · Trimming the Mainsail. The traveler and the mainsheet work dynamically together. Both move the boom inwards and outwards from the centerline of the boat. The difference is that the mainsheet also lets the aft of the boom move up and down and thus loosening or tightening the leech (aft) of the sail.

  1. People also search for