Search results
Apr 30, 2024 · In this article, I walk through programming, changing, and resetting the codes for various Kwikset smart locks, including Obsidian, Premis, Powerbolt 2, Kevo, SmartCode 914, 275 Touchscreen Electronic Deadbolt, SmartCode 888, and SmartCode 910.
This guide will get you up and running with your new SmartCode™ Lock. If you have any issues, please visit our support center: kwikset.com or call us at 1-800-327-5625. Page 3 Table of contents Parts in the box .....4 Required tools .....5 Installation .....7 Programming guide .....19...
- Step One: Remove Your Existing Deadbolt
- Step Two: Install The Smartcode Smart Lock
- Step Three: Connect It to Your Smarthome Hub
First, you'll need to remove the current deadbolt installed on your door. This usually just involves removing a couple of screws from the lock's face plate on the inside of your home. After removing those screws, the entire deadbolt should come apart pretty easily. Just separate the outside and inside portions of the deadbolt to remove the whole th...
To begin install the new door latch if you're not using an existing one. Slide the latch into the door, making sure that the middle hole in the latch is centered within the hole in the door. If it's not, remove the latch and rotate the mechanism 180 degrees (while holding onto the actual deadbolt) to change the position of the middle hole. Re-inser...
SmartCode locks can be used without a smarthome hub, but the whole point of a smart lock is that you can control and manage the lock remotely from your phone, which is why it's ideal to connect it to a smarthome hub. How you do this is completely dependent on what type of hub you have, but the process should be mostly the same all around. In my cas...
- Craig Lloyd
Reinstall the lock. If the turnpiece does not align with the torque blade, rotate the turnpiece 180° clockwise (you will need to use force when rotating the turnpiece, and you will hear it click). Perform the door handing process once the lock is fully installed.
Disassemble the lock, and reinstall it without the adapter ring on the exterior side of the door. The wrong deadbolt latch is installed. SmartCode deadbolts require a tapered latch bolt for ease of operation.
SmartCode deadbolts require a tapered latch bolt for ease of operation. If the latch being used is from an older lock, it will likely not have a tapered latch bolt. Remove the lock from the door, including the old latch. Replace with the new tapered latch that came with the lock and reinstall the lock.
People also ask
How do I reinstall a SmartCode door?
How do I relock my SmartCode?
Why is my SmartCode deadbolt not working?
How do I program a smart door lock?
11. SmartCode User Selectable Settings. Switch #2 Enables the AUTO LOCK when in the ON position. With Auto Lock en-abled, SmartCode will automatically relock the door 30 seconds after unlocking. Switch #1 Status LED blinks every 5 seconds when in the ON position. Note: The low battery RED LED cannot be disabled. Switch Position OFF ON LED Color ...
